FTTX SOLUTION
UNIVERSAL MECHANICAL SPLICE (NO TOOL)  
   

PDR's Mechanical Splice was designed for splicing any 250 to 900 fibers. The tool function was built inside Mechanical Splice so no additional tool is required for 900/900um or 900/250umsplice.

Using V groove technology, it requires no epoxy. With transparent body, the splice result can be seen by Fiber Checker immediately. It has average insertion loss of 0.1dB and installation time of 30 seconds. This is an ideal solution, either for outside plant or inside a building.

Features:
• No Epoxy required
• No Tool or Jig required
• Transparent body for immediate splicing confirmation.
• Universal for 250 or 900 um Fibers
• 30 seconds for splicing
• Average Insertion Loss 0.1 dB
• Re-usable after Connecting

Specification :

Fiber Size

250 & 900 um

Assemble Time

30 seconds (after preparing fiber ends)

Mean Insertion Loss

0.1 dB

Return Loss (dB), Typical

-50

Pull Strength (N), Typical

5N

Operating Temperature (℃)

-40 ~ +85

Materials

Engineering Plastics & Index matching gel

Dimension, LxWxH (mm)

38 x 3.8 x 6.5

Ordering Information :

Part number

Description

Splicing Fibers

Tool is

MSP-21

Mechanical Splice for Optical Fiber (No Tool)

900/900; 250/900

Optional

MSP-31

Mechanical Splice for Optical Fiber (Economy)

900/900; 250/900; 250/250

Must

MST-25

Tool for Mechanical Splice

NA

NA


^TOP
 back to product page
FTTX SOLUTION
•  ONU/OLT
•  PLC Splitter
•  Bend Insensitive Single Mode    Patchcord
•  Field Assembly Optical Connector    (SC Type)
•  Drop Cable
•  Splice Closure
•  Face Plate
•  Mechanical Fiber Splice
•  Quick Assembly Connector
•  Universal Mechanical Splice
 
 
Subscribe to newsletter
Email Address
 
© PDR 2008. All Rights Reserved.