PDR’s Quick Assembly Connector (also named “No-Polish Connector” ) is an easy-to-install device. No tool or jig is required. It is universal for 250um / 900um / 2.0mm / 3.0mm / Flat Cable.
It is designed for fast termination with pre-polished fiber inside. Using V groove technology, it requires no epoxy. With transparent body, the fiber alignment and mating can be seen by Fiber Checker immediately. This is an ideal solution, either for outside plant or inside a building.
Features:
• Transparent body for immediate fiber mating confirmation
• Universal for 250um / 900um / 2.0mm / 3.0mm / Flat Cable
• No Tool or Jig required
• Pre-polished connector
• No epoxy required
• 30 seconds for termination
• Average Insertion Loss 0.1 dB
• Re-useable
•
Customization for other fibers
Specification :
Cable Size
250um / 900um / 2.0mm / 3.0 mm / Flat Cable
Assemble Time
30 seconds (after preparing fiber ends)
Insertion Loss (dB), Typical
0.1 dB
Return Loss (dB), Typical
-50 ~ -55dB
Pull Strength (N), Typical
0.5kgf (900um); 6kgf (3.0mm); 1kgf (Flat Cable)
Operating Temperature (℃)
-40 ~ +85
Materials
Engineering Plastics & Index matching gel
Ordering Information :
Part number
Description
Housing Color
PDR-QSC-09
SC Quick Assembly Connector SM
Blue
PDR-QSC-50
SC Quick Assembly Connector MM 50um
Beige
PDR-QSC-62
SC Quick Assembly Connector MM 62.5um
Beige
PDR-QSC-80
SC/APC Quick Assembly Connector SM (Flat Splice)
Green
N/A
SC Quick Assembly Connector (Customization for other fibers)
back to product page
