Fusion Splicer

The EasySplicer mk2 is a Swedish made Fusion Splicer, designed for working daily with fiber optic installations. It´s small and handy to bring along to any kind of work. The construction is made very rugged and even if splicing should take place under good conditions (indoors) it is still designed to be used out in the field. The design of the EasySplicer mk2 differs a bit from other Fusion Splicers as it is made with focus on the installer/user. Many of the Splicers on the market are, even if very competent, difficult to use and require a lot education before they can be operated. The EasySplicer mk2 is very easy to learn how to use. It doesn´t take more than an hour for anyone to learn how to use the Splicer and start working with it.

The EasySplicer mk2 operates with three buttons only and mostly the user only has to use the main button to perform the splicing. Still, the precision of the unit is extremely high. It makes typical splicing with a loss of 0,03 dB (Single mode). After splicing it pull tests the splice and makes a loss estimation of the splice where it also tells if something is wrong. Such information is also provided before splicing (like; Bad fiber and Dirty fiber ).

The battery-pack inside the unit is small but very powerful. The unit can perform some 60 splices before it needs to be recharged. Extra battery-packs can also be sold separately (and easily be exchanged in the unit by the installer). The EasySplicer mk2 is constantly calibrating itself for environment changes (like; moisture). This can also be done manually, for ex. when starting the work of the day. Calibration is very easily performed (within seconds) and makes sure that the splicing is made perfect. The EasySplicer mk2 is using the V-grove method for splicing (same as Ribbon-splicers are using) which has made it possible to keep the size small of the unit. It also makes this unit extremely cost-effective. The EasySplicer mk2is one of the most inexpensive splicers on the market, yet with a performance of 4-5 times more expensive units.

The EasySplicer mk2 is upgraded with a ceramic/Teflon-heater which also is ready for SOC-connectors (Splice on Connectors). The EasySplicer mk2 is truly a grand innovation for making Fiber optic networks. It will revolutionize the ease to build such networks and it will cut the costs for the customers which will generate more work for the installers!

Features:
* Fusion splicing made easy and affordable with the EasySplicer mk2.
* For both Singlemode and Multimode fibres.
* Splicing time of less than 7 seconds.
* Loss estimation.
* Pull test of performed splices.
* Built-in oven.
* Easy to use and to carry along.
* Perfect for the FTTH installer.
Strip… Clean… Cleave

Included parts:
* Oven (Built-in).
* 3 pairs of fiber holders, 250um 900um and loose tube.
* Cleaver with bin (trash can).
* Stripper.
* Rechargeable battery pack (Built-in).
* Power supply.
* Carrying case.

Optional accessories:
* Soft carrying case.
* Car charger.
* Powerbank charger.
* SOC holders.